(1) Methods of using chemical additives Adding certain chemical additives to the lubricant of imported bearings can reduce the noise of imported bearings. For example, a low-noise grease containing noise reducing additives produced by a factory in Ti...

After installing the imported bearings, in order to verify whether the installation is correct, a running inspection should be carried out. Small machinery can be rotated by hand to confirm whether the imported bearings rotate smoothly. The inspectio...

Imported bearing lubricating grease is usually represented by apparent viscosity or similar viscosity. When explaining the viscosity of the grease, temperature and shear rate must be specified. Similar viscosity indicators can be used to control its ...

We often encounter premature failure of imported bearings, and according to statistics, about 16% is caused by improper or incorrect installation. According to various mechanical applications, it is necessary to properly install thermal or hydraulic ...

Usually, a shaft is supported by two bearings in the radial and axial directions. One side of the bearing is called a fixed end bearing, which bears both radial and axial loads and plays a role in fixing the relative axial displacement between the sh...

In order to improve the service life of imported bearings, it is necessary to choose a bearing lubrication method that uses clean lubricating oil. There are many methods of oil lubrication, including oil injection, oil bath, oil mist, circulating oil...

When choosing a match, the first thing to consider is the type of load that the collar can withstand. There are usually three types of loads that the ring can withstand: 1 Fixed load The composite radial load acting on the ring is borne by the local ...

The increasingly stringent market requirements for imported bearings include equipment and other attributes, as well as diverse performance. To select suitable bearings from a large number of structures and sizes, different angles are required. When ...

There are two main factors that affect the grinding deterioration layer of SKF bearings, namely the effects of SKF bearing grinding force and grinding heat. 1. Grinding force During the grinding process, the surface layer of the workpiece will be sub...